Q100 Roll Formed Roller Shutter with 100mm Galvanised Steel material is manufactured by ARCO (Qld). The heavy duty steel is designed to withstand the wear and tear of industrial and commercial applications with minimal maintenance. The rolled slat can be replaced individually should the damage occur. ARCO (Qld) Steel Roller Shutters are purposely built with guide channel that has nylon rubber anti wear strip to minimize the noise that is created from the interlocking slats. The Q100 Steel Roller Shutters can be hand operated or electric operated. Each slat is fitted with nylon end clips to reduce the lateral movements and ensure smooth operation for the life of the door
​
Recommended Specification
Q 100 Roll Formed Roller Shutter with 100mm Galvanised Steel materials as manufactured by ARCO (QLD).
​
Design Features
The Heavy Duty steel slat is designed to withstand the wear and tear of industrial and commercial applications with minimal maintenance. The rolled slat can be replaced individually should damage occur.
ARCO (QLD) Q100 Steel Roller Shutters are purposely built Guide Channel that has Nylon Rubber to minimise the noise that comes from the interlocking slats. Q100 Steel Roller Shutters can be Hand operated or Electric operated. Each slat is fitted with nylon end clips to reduce the lateral movements and to ensure smooth operation for the life of the door.
For Cyclonic conditions, high strength wind locks and guides are designed to prevent the curtain from blowing out of the guide rail. Wind locks can be every 2nd or every 4th slat depending on the location and function.
​
Standard Curtain
The Series Q100 are available in 0.8mm and 1.0mm thickness.
Note: Recommended maximum width is 10 meters. Refer to ARCO (QLD) Counterweight products for larger single span openings.
​
Curtain Alternatives
SLOTTED Slats (Ventilation) – Any number of the slats can be punched with 90mm wide x 25mm high slot. MULTI HOLE Slats – The slats can also be continuously perforated with 2.41mm diameter holes at 3.66mm staggered centres prior to rolling (this allows maximum air flow the holes are over the entire surface area of the slat). These perforations cover 40% of the slat surface.
​
Roller Drum
The roller drum is a robust seamless steel tube encasing the shaft and helical counterbalance spring (for manually operated). The end caps and roller bearings are designed to give smooth operations.
​
Guide Channels
2.0 mm galvanised steel is roll formed with the nylon rubber to make a noticeably quiet steel Roller Shutter when opens and closes on a 100mm x 48mm guide channel.
Support Bracket
The support brackets are fabricated from mild steel plate and designed to be fitted to a solid fixing point of adequate strength to support the weight of the door and any wind loading that may be required (adequate fixing points to be supplied by others).
Bottom Rail
The Bottom Rail is roll formed from 3mm galvanised steel to make a 50mm x 50mm angle. This angle is securely fixed to the front of the slat (bottom of angle protrude to inside of opening). This can also be Aluminium Bottom Rail.
​
Operation
Hand Operation – Small Roller Shutters with an area of 6 square meters maybe hand operated. Pull hook is provided for opening and closing the door.
Electric Operated – Motorisation includes Single Phase, 1Hp motor incorporating a standard reversing contractor and an Up, Down, Stop button controller with a hand chain override in case of power failure. For Remote Control and other options, please contact ARCO (QLD). All wiring will be by others.
Locking Operation
Hand Operated – will have Sliding Shute bolts.
Electric Operated – will be secured by electrical motors and controls.
​
Finish
Standard finish is Galvanized Curtain and Guides with all other exposed parts prime painted. Optional finishes to Slats only is powdercoating. Colorbond finish in limited colour range